| SP-500i: Specifications |
| Table Travel (X & Y Axis) |
19.7" x 11.8" |
| Z Axis Travel |
11.8" |
| U & V Axis Travel |
3.9" x 3.9" |
| Table Feed Rate |
0 - 51.1 IPM |
| Maximum Taper Angle |
|
| Standard AWT |
± 23° |
| Optional |
± 45° |
| Maximum Workpiece Size (X,Y,Z) |
38.4" x 22.6" x 11.6" |
| Granite Base Table |
N/A |
| Maximum Workpiece Weight |
3,400 lbs. |
| Automatic Wire Thread System |
Standard |
| Wire Diameter |
0.004" - 0.014" |
| Wire Feed Rate |
0 - 590 IPM |
| Wire Tension |
300 - 2,200 grams |
| Start Hole Size |
.020" |
| Maximum Wire Spool Weight |
35 lbs. (opt. 100 lbs.) |
| Heidenhain Linear Glass Scales .000004" Resolution |
Standard |
| Positioning Accuracy |
+/- .0001" |
| Machine Weight |
7,725 lbs. |
| Dielectric Tank |
| Tank Capacity |
235 gallons |
| Paper Filter (Cartridge Type) (Quantity) |
3 |
| Deionized (Resin Tank) 1 Cubic Feet |
Standard |
| Cooling Unit (Chiller) |
Standard |
| Power Supply |
| Discharge Power Circuit |
AC MOSFET Standard |
| Application Specific Integrated Circuit |
ASIC Standard |
| Anti-Electrolysis Power Supply |
Standard |
| Intelligent OV Circuit |
Standard |
| Modular PC Board Design |
Standard |
| SD Master |
Standard |
| Micro Sparking Technology (MST II) |
Standard |
| Input Power Supply |
|
| V |
220 V +/- 5%, 3 Phase, 60 HZ |
| KVA |
20 |
| CNC Control |
| Control Device |
64 - Bit Windows CE Based IPC |
| Screen Display |
15" Color TFT Touch Screen |
| Memory Capacity |
128 MB SD RAM |
| Controlled Axis |
|
| Standard |
X, Y, Z, U, V (5 Axis Simultaneous) |
| Optional |
6th Axis Simultaneous: X, Y, Z, U, V, Plus W Axis |
| Least Input Increment |
0.000004" |
| Least Command Increment |
0.000004" |
| Input/Output Interface |
Keyboard, RS-232c, Ethernet, USB Ports (2) |
| Servo Control System |
Full-Closed Loop |
| Interpolation |
Linear, Circular |
| Maximum Programmable Dimension |
± 999.99999" |
| Command Unit |
Inch/Metric Switchable |
| Scaling |
0 to 9.9999 times |
| Figure Rotation |
± 360° |
| Mirror Image |
Independent X and Y Axis |
| Wire Diameter Compensation |
0 - ± 9.99999" |
| Automatic Coordinate System Skewing Calculation |
|
| |
| *Specifications subject to change without notice |
